? semiconductor components industries, llc, 2000 october, 2000 rev. 3 1 publication order number: murp20020ct/d murp20020ct, murp20040ct preferred devices powertap ? ii ultrafast switchmode ? power rectifiers . . . designed for use in switching power supplies, inverters, and as free wheeling diodes. these stateoftheart devices have the following features: ? dual diode construction ? low leakage current ? low forward voltage ? 175 c operating junction temperature ? labor saving p ower t ap package mechanical characteristics: ? case: epoxy, molded with metal heatsink base ? weight: 80 grams (approximately) ? finish: all external surfaces corrosion resistant ? top terminal torque: 2540 lbin max ? base plate torques: see procedure given in the package outline section ? shipped 25 units per foam ? marking: up20020, up20040 maximum ratings please see the table on the following page ultrafast rectifiers 200 amperes 200400 volts device package shipping ordering information murp20020ct powertap ii 25 units/tray plastic case 357c powertap ii http://onsemi.com 1 2 3 1 2 3 preferred devices are recommended choices for future use and best overall value. marking diagram up200x0 up200x0 = device code x = 2 or 4 yy = year ww = work week yyww murp20040ct powertap ii 25 units/tray
murp20020ct, murp20040ct http://onsemi.com 2 maximum ratings rating symbol murp20020ct murp20040ct unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 200 400 volts average rectified forward current per device (rated v r ) per leg i f(av) 200 (t c = 130 c) 100 (t c = 130 c) 200 (t c = 100 c) 100 (t c = 100 c) amps peak repetitive forward current, per leg (rated v r , square wave, 20 khz), t c = 95 c i frm 200 200 amps nonrepetitive peak surge current per leg (surge applied at rated load conditions halfwave, single phase, 60 hz) i fsm 800 800 amps operating junction temperature t j 55 to +175 55 to +175 c storage temperature t stg 55 to +150 55 to +150 c thermal characteristics (per leg) rating symbol max unit thermal resistance, junction to case r q jc 0.45 0.45 c/w electrical characteristics (per leg) instantaneous forward voltage (note 1.) (i f = 100 amps, t c = +25 c) (i f = 200 amps, t c = 25 c) (i f = 100 amps, t c = 125 c) v f 1.00 1.10 0.95 1.30 1.75 1.15 volts instantaneous reverse current (note 1.) (rated dc voltage, t c = 125 c) (rated dc voltage, t c = 25 c) i r 1000 150 500 50 m a maximum reverse recovery time (i f = 1.0 amp, di/dt = 50 amps/ m s) t rr 50 75 ns 1. pulse test: pulse width = 300 m s, duty cycle 2.0%.
murp20020ct, murp20040ct http://onsemi.com 3 package dimensions powertap ii case 357c03 issue e b 0.25 (0.010) m ta mm dim a min max min max millimeters 3.450 3.635 87.63 92.33 inches b 0.700 0.810 17.78 20.57 c 0.615 0.640 15.63 16.26 e 0.120 0.130 3.05 3.30 f 0.435 0.445 11.05 11.30 g 1.370 1.380 34.80 35.05 h 0.007 0.030 0.18 0.76 n 1/4-20unc-2b 1/4-20unc-2b q 0.270 0.285 6.86 7.23 r 31.50 bsc 80.01 bsc u 0.600 0.630 15.24 16.00 v 0.330 0.375 8.39 9.52 w 0.170 0.190 4.32 4.82 notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. terminal penetration: 5.97 (0.235) maximum. r g w n q b 0.25 (0.010) m ta mm 2 pl e seating plane f v u c h a b t
murp20020ct, murp20040ct http://onsemi.com 4 on semiconductor and are trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to make changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. atypicalo parameters which may be provided in scill c data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including atypicalso must be validated for each customer application by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthori zed use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. publication ordering information central/south america: spanish phone : 3033087143 (monfri 8:00am to 5:00pm mst) email : onlitspanish@hibbertco.com tollfree from mexico: dial 018002882872 for access then dial 8662979322 asia/pacific : ldc for on semiconductor asia support phone : 3036752121 (tuefri 9:00am to 1:00pm, hong kong time) toll free from hong kong & singapore: 00180044223781 email : onlitasia@hibbertco.com japan : on semiconductor, japan customer focus center 4321 nishigotanda, shinagawaku, tokyo, japan 1410031 phone : 81357402700 email : r14525@onsemi.com on semiconductor website : http://onsemi.com for additional information, please contact your local sales representative. murp20020ct/d powertap ii and switchmode are trademarks of semiconductor components industries, llc. north america literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 3036752175 or 8003443860 toll free usa/canada fax : 3036752176 or 8003443867 toll free usa/canada email : onlit@hibbertco.com fax response line: 3036752167 or 8003443810 toll free usa/canada n. american technical support : 8002829855 toll free usa/canada europe: ldc for on semiconductor european support german phone : (+1) 3033087140 (monfri 2:30pm to 7:00pm cet) email : onlitgerman@hibbertco.com french phone : (+1) 3033087141 (monfri 2:00pm to 7:00pm cet) email : onlitfrench@hibbertco.com english phone : (+1) 3033087142 (monfri 12:00pm to 5:00pm gmt) email : onlit@hibbertco.com european tollfree access*: 0080044223781 *available from germany, france, italy, uk, ireland
|
